
Real garages. Real jobs.
Why home mechanics keep one in the box




"I do a lot of CV axles on older Hondas and Toyotas. Bought one, then bought one for each bay. The young guy I have quit reaching for the air hammer on inner joints."
Composite images for illustration.
Product Details
- 16 oz forged carbon steel head
- Steel handle, shock-absorbing anti-slip grip
- Claw locks in 4 positions: straight, hooked at 90°, tucked flat, folded
- Steel pivot pin with spring detent and push button
- Magnetic nail slot on the face
- About 14" long, roughly 2 lb in hand
- Fits framing, finish, roofing and brad steel nails
Actual product packaging may vary.
Will it get my CV axle out?
It gives you a pry claw you can set at the angle the job needs. Hook the claw behind the lip of the inner joint housing, rest the head on the case, and pull square. If the joint is held by a normal spring clip, that is usually all it takes. It is not a press or a puller, so pressed-in parts and joints rusted solid still need the right tool.
1-Year Money Back Guarantee
We stand by our product. Keep the Adjustable Claw Hammer in your toolbox for 365 days. If it doesn't earn its spot, contact our support team and we refund 100% of your money. No fine print.
Sound familiar?
Why make it harder than it has to be?
Axle won't budge?
The first side came out like the video. The second one won't move, and there's no room to swing a bar.
Nail stuck in a corner?
A straight claw can't get under the head, so it chews the board and the nail stays put.
Holding nails with your fingers?
Pinch, tap, miss, bend it, start over. On a ladder it's worse.
One hammer fixes all three: set the claw to the angle the job needs.
Move the claw. Not the job.
Three things this does that a fixed claw cannot.
Stop holding the nail with your fingers.
The magnet holds it for you. Set it, swing once, and your other hand stays free.
Why the others fail
What happens with the tools already in your drawer
Flat screwdriver
It finds the gap, then bends on the second pull and leaves a dent in your palm.
Pry bar or cat's paw
Too long to fit between the subframe and the joint, or too short to get any leverage.
Straight claw hammer
The claw points straight back, so it hits the subframe or gouges the part instead of the joint.
Savary Adjustable Claw
Set the claw to 90°, hook behind the lip, and pull the handle toward you where your arms have room.
One hammer, four jobs
Use it anywhere

Car repairs
CV axles, control arm bolts that won't line up, engine mount brackets.

Deck and fence
Nails in the corner of a board, fence staples, old deck screws gone soft.

Framing and demo
The nail behind the stud and trim you want to reuse without splitting it.

Brackets and tight spots
Claw tucked flat slides under a bracket or a lip where a bar won't fit.
The Cat's Paw? Stays In The Drawer.
What owners do with it on a Saturday.
What Makes Savary So Different ?
Built for the nail behind the stud and the board you want to keep. One hammer, four claw positions, no second tool.
|   |
|
Standard Claw Hammer |
|---|---|---|
| Reaches The Nail At Any Angle | ||
| Starts The Nail Without Your Fingers | ||
| Pries Flush Where A Bar Will Not Fit | ||
| Pulls Without Chewing Up The Wood | ||
| Comfortable With Gloves On, All Day | ||
| 1-Year Money-Back Guarantee |
Try It Risk-Free for 1 Year
We get it. You have been burned by cheap tools before.
That's why we offer a straightforward guarantee:
If the Adjustable Claw Hammer doesn't make the next stuck nail feel like cheating, send it back within 1 Year for a full refund.
No restocking fees. No fine print. No arguing.
Either this hammer earns a permanent spot in your truck, or you get your money back. Simple.